SIHH 2019 – Speake-Marin launches its new Haute Horlogerie masterpiece: the Minute Repeater Flying Tourbillon “Légèreté”, the first Minute Repeater Carillon in the world assembled in a case which is fabricated in 100% sapphire crystal.
The new Speake-Marin Haute Horlogerie masterpiece is called “Légèreté”, which means “Lightness” in English, to highlight the sapphire-crystal case, which allows to literally dive into the movement from the top, the sides or the case back. The case is made up of three parts: the bezel, the case back and the middle section. The process by which the sapphire is made into a finished watch case is extraordinarily difficult, involving many hours of machining and polishing. The most difficult part is the case finishing where one must avoid any scratches during manufacture: the case must be perfectly transparent.
At 6pm, you find the 60 seconds Flying Tourbillon, which is held by a cage shaped into the Speake-Marin symbol. This Flying Tourbillon gives the illusion that the watch is alive.
In addition, the movement conceals a Minute Repeater Carillon. When the slider on the left hand side is activated, the Minute Repeater Carillon starts to ring and launches the dial animation: the XII index disintegration.
From a technical point of view, it is interesting to note that there is a double safety module, which enables the setting of the time while the watch chimes thanks to the Carillon, and vice-versa. In addition, a regulator wheel regulates the Carillon speed… not too fast, not too slow… This wheel is almost silent so as not to distort the Carillon sound. The energy comes from a specific barrel dedicated to the Carillon and the dial animation so as not to disturb the watch chronometry.
Moreover, the hammers have been welded to a block which creates a sound box with the case to get a nice Carillon sound.
The Minute Repeater Carillon gives the time thanks to three hammers:
- One hammer for the hours
- The three hammers all together for the quarters
- One hammer for the minutes
Once the time is given by the 3 hammers, the XII Roman numeral comes back to its initial position.
On this piece, the finishing and decoration are very refined, which demonstrates Speake-Marin’s Haute-Horlogerie know-how: all the surfaces are reworked, corrected and decorated. So, the Tourbillon at 6 o’clock features a hand-finished 60-second cage that can be fully appreciated through the display back when the tourbillon is over.
The lower tourbillon cage is supported by a striking paddle-shaped bridge offering clear visual access to the surrounding gears below. The bridges and main plate are circular-grained with polished screw heads and polished countersinks.
Last but not least, the entire watch is engraved with words: on the casing girdle, on the sides and on the case back. These words reflect the Speake-Marin DNA, values and know-how: independent, respect, art piece, etc.…